Issues On Mold Indoor Air Quality

Molds are already part of the environment. They can be found everywhere, it maybe indoors or outdoors. These can often be found in wet areas like sinks, bathroom curtains, and floors. So, to control the growth of molds, you should be able to control moisture.

What often causes irritation to lungs, throat, nose, skin, and eyes is the exposure to these. These are just common health problems that are caused by mold indoor air quality. They black green and slimmy organisms that are often seen in the walls and in the roofs. Mold species like these are uncommon and can produce toxigenic spores according to investigators.

Some types of environmental problems can be resolved by just fresh air, but living organic substances such as molds must be removed. Even when dead, it still releases spores on air. Some molds are harmless, but some are very toxic. Many tests are conducted for the levels of potential risk from exposure. But this results only to few regulations and documentation.

Many have said that most people nowadays are more sensitive as compared before, like years ago. This is because the materials used in most buildings today are highly exposed to molds due to the low nitrogen and high cellulose it contains. These two contents are targets of spores when there is moisture. Materials that easily gets wet must be dried quickly because it is considered to have a higher humidity.

For people who are sensitive to this, inhaling and touching it may cause allergic reactions like sneezing, runny nose, red eyes, and skin rashes. And people with serious allergies may have severe reactions like shortness of breath. Spores can also cause asthma attacks to people with asthma. Infants, children, older people, people with diseases like infections, cancers, and lung diseases are more sensitive to this.

It could be impossible to get rid of these spores indoors. If moisture is not there, spores will not be able to grow. You must control the moisture indoors to prevent this. Water problems should be fixed and cleaned right away when you see mold growth in your home. If you cannot fix problems right away, it is possible for molds to keep coming back.

If you ever see some water leaks and some spills, you should immediately dry it up. Drying it up between 24 and 48 hours will help reduce or prevent spores to grow. Gutters of the roof must be cleaned and should be repaired regularly. For rooms which are air conditioned, drip pans should be cleaned and the drain lines should be properly built and constructed for water to flow properly.

Humidity in indoors should be up to 60 percent only. But average humidity temperature ranges from 30 to 50 percent. If there are some condensations on the walls, pipes, and windows, dry up the wet surfaces directly to reduce moisture. Condensation is produced by high humidity.

The use of biocides can kill living organisms. Chlorine bleach is not recommended for cleaning up. And also, do not ever mix chlorine bleach solution to any biocides since it produces toxic fumes. When cleaning up, always ventilate the area and exhaust the air to the outdoors.

To arrange for an inspection of mold indoor air quality, homeowners should contact us right away. We will pay a visit to your property today if you get in touch through this site

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)

Tags: ,


This author has published 1 articles so far.

Comments are closed