What Are Sewage Backups?

Sewage backups may be among the nastiest things you can experience as a homeowner. They damage your property, leave behind a stinking smell, invite bacteria inside and create an unpleasant environment for your guests. With a bit of knowledge, though, you could instantly learn all you need to know about dealing with sewage backups in your home.

Avoid Drainage to Your Sewer:

Throughout the country, it’s against the law for your rain spout to drain into the public sewage system. The reason being that when all the houses situated in an area drain gallons of water into the sewer, it is prone to choke within a few hours.

With that being said, you can still find plenty of areas where it’s a very common practice to place the downspout into the public sewer. When your neighbors are experiencing a sewage backup following the monsoons, there are high odds that their downspouts may be draining into a public sewer nearby.

If You Can’t Avoid It, Prevent It!:

If the geographical area and structure of the community fails to prevent domestic drainage into the sewer line, you can consider a substitute. Advice your neighbors to get a back-flow check system installed in their houses. This will check the dirty water from rising up the pipes or getting into the basement or cellar. This system is placed within the drainage pipe running in the basement or cellar. When the water level goes up, a rubber stopper plugs up the hole, entirely preventing any water from getting into your basement or cellar.

In certain localities, back-flow stoppers are illegal. The reason is easy to understand. If everyone had back-flow stoppers and a major event caused the sewers to flood, the pipes can end up bursting. Raw sewage freely running in your cellar or on the streets is much worse than having a smelly pipeline in the basement.

If, however, your neighbors are not willing to change the spot of their downspouts, you may want to consider having one installed. A sump pump is an alternate choice option, however it doesn’t really prevent the sewage from entering your cellar.

If You Can’t Prevent It, Lessen the Damage!:

The operation of a sump pump is rather straightforward. It resembles the structure of a bucket and is put in a recessed area, most probably the cellar. When your basement floods, the water will certainly gather in this place, first, because it is the lowest point in the room. Once the water level reaches one to two ins in the bucket, the pump will switch on.

The water will be sucked up through the pump and dumped outside of your house. It certainly doesn’t stop all of the damage connected with a flooded basement, however it may decrease it greatly.

Both sump pumps and back flow stoppers are comparatively affordable. Contacting your local plumber is the best way to learn about how to have them properly installed. The final thing you wish to experience is a malfunctioning back-flow stopper or sump pump when your cellar starts to flood.

You shouldn’t be under a false impression that getting in touch with a plumber will solve your difficulties. Sometimes you have to follow extra measures to avoid domestic tragedies.

To obtain the complete story and all of the facts, go and visit http://wichitaplumbingandheating.com/ for more information about heating and air.

VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)

Tags: , , , , , , , , , ,

Author:

This author has published 1 articles so far.

Comments are closed