The construction business requires many types of equipment and machinery. When it comes to large urbanization projects some may need something as large as cranes, back hoes and other ones that get the job done. The project managers and owners have a choice of whether to rent out these things or buy them depending on the circumstance and duration of construction.
Part of building the foundation of something as big as a skyscraper involves a lot of ground work. Solid footing is a matter of safety and structural integrity. There are two ways of doing this and using a galvanized pile driver is one necessary equipment to get the job done properly. This is to make sure that the foundation is deep enough. For more residential and low floor structures, deep foundation procedures are not necessary.
While it may not be necessary for low standing structures like houses with only one level, it is definitely a must for buildings. The pile is meant to help hold the building in its place and the surrounding things with it help distribute the weight evenly. The pole is meant to be dug past the top soil, which is more often loose, and then dug into the subsoil. The subsoil has a firmer hold and is therefore best for a more stable footing.
Materials such as reinforced concrete, timber, steel and others are used as poles or piles that support the foundation. There is a basic engineered structure that is usually the standard when using the deep foundation method. It is composed of the pole, cap, the grade beam and the wall. Since the pile is not able to carry all the weight alone, these other areas assist in taking care of the load.
Two ways of installing piles are available. First there is boring and second, driving. The driver is meant to cast the pole in the yard and drive it down to the soil.This is only one type of two for driving methods which is called the driven pre cast pile. There is also the driven cast in situ pile. For boring two options are also available.
The methods that is used depends on factors like soil quality, rocks, strata and other environmental compositions that is present in the location. Since soil have different consistencies, the materials and ways used for the pile and its installation would have to vary accordingly. What is done on normal wet soil, cannot be done in a construction located on the mountain, or the desert, like Dubai.
A procedure needs to be undergone before there is approval for usage and pile driving that happens in the lot. This is approval coming from the engineer and needs some form of evaluation before the contractors can proceed. The driver is composed of parts and the engine that powers it can vary in efficiency. Using which hammer type also depends on the engineer in charge.
This particular machinery also vary in types. The types are based off on what power source or engine is being use to handle the job. There are five most popular that are being used in construction today. The first one ever invented was the drop type using only gravity as its source of strength and power. It basically just drives the material by raising the pole at a certain length and hammering it down with the help of gravity.
This is one of those construction machinery that requires a good amount of study for its usage to be effective. While its basic principle is a lot like a hammer, there are greater complexities that surround it when brought in a more large scale setting. The pole is the nail that needs to be pushed into the surface while the driver is the hammer.
Find out the different uses of a galvanized pile driver by reading more about it online. This website contains all the details at http://www.piledriver.org.
Author: Stephanie NelsonThis author has published 1 articles so far.